Ableteccom C1 Datasheet -

The Peak AM-500C1 is a high-efficiency Class D amplifier module designed for power outputs between 300W and 500W, featuring low residual noise ( ) and low THD+N (

Active Studio Monitors:

Its small size allows it to be mounted directly inside speaker cabinets without occupying significant internal volume. ableteccom c1 datasheet

Blog Post Draft: Unleashing Audiophile Power: The Abletec C1 Datasheet Breakdown

| Parameter | Symbol | Conditions | Typical Value | Unit | | :--- | :--- | :--- | :--- | :--- | | Total Harmonic Distortion + Noise | THD+N | 50% Power, 1kHz | < 0.02 | % | | Signal-to-Noise Ratio | SNR | A-Weighted | > 105 | dB | | Dynamic Range | | A-Weighted | > 105 | dB | | Frequency Response | | -3dB points | 20 - 20,000 | Hz | | Channel Separation | | 1kHz | > 60 | dB | | Voltage Gain | $G_v$ | Nominal Input to Full Output | 26 | dB | | Input Sensitivity | | Rated Power @ 4Ω | 1.0 | V RMS | | Input Impedance | $Z_in$ | Balanced Inputs | 10 / 20 | kΩ | The Peak AM-500C1 is a high-efficiency Class D

B.M.C. Audio Amplifier C1 integrated amplifier Specifications MTBF (if provided) Operating temperature: e

• MTBF (if provided)
• Operating temperature: e.g., -40°C to +85°C
• Storage temperature and humidity limits

• [ ] Do you need the CAN-bus variant? (Check model number suffix).
• [ ] Is your ambient temperature consistently above 70°C? (Review derating curves).
• [ ] Have you confirmed the logic level compatibility (5V vs 24V for digital inputs)?

The Ableton C1 is widely used in various audio equipment, including: