Acer Ipisb-vr Rev 1.01 Front Panel Better -

Acer IPISB-VR Rev 1.01

The is a proprietary motherboard often found in pre-built systems like the Gateway DX4860 . Because Acer does not provide a standard public manual for this board, identifying the front panel pinout is the most common hurdle for those moving the board to a new case. Front Panel Header Pinout

The Odd Row (1-3-5-7):

Usually the row closer to the center of the board. acer ipisb-vr rev 1.01 front panel

• Acer uses a single 10-pin block. Many standard cases have split 2-pin or 1-pin connectors. Insert each small connector individually using the pinout above.

For more technical details, you can find discussions on this board's layout at the Acer Community Forum or Tom's Hardware . Acer IPISB-VR Rev 1

the front panel connectors aren't properly marked on the motherboard. I have attached an image showing what i'm looking at. Tom's Hardware Acer uses a single 10-pin block

Answer sheet space

| Pin | Signal | Description | Color (Typical Acer wiring) | |-----|------------------|-----------------------------|------------------------------| | 1 | +5V (LED) | Power LED Anode (+) | Green (or Blue/White) | | 2 | +5V (LED) | Power LED Anode (+) (alt) | Not used / duplicate | | 3 | GND | Power LED Cathode (-) | White | | 4 | GND | HDD LED Cathode (-) | White | | 5 | HDLED+ | HDD LED Anode (+) | Red (or Orange) | | 6 | PWR_BTN+ | Power Switch (NO) | Blue (or Yellow) | | 7 | GND | Power Switch GND | Black | | 8 | GND | Reset Switch GND | Black | | 9 | RESET+ | Reset Switch (NO) | Purple (or Gray) | | 10 | NC / GND | Not connected or Ground | (unused) |