Anytone At5555n Ii Service Menu Updated Fixed [ GENUINE · BUNDLE ]

AnyTone AT-5555N II service menu

I understand you're looking for information on the , specifically an updated or corrected version.

updated

Recent firmware updates (post-2023) have changed how users access and navigate this hidden diagnostic suite. Welcome to the guide for the AnyTone AT5555N II Service Menu .

AnyTone AT-5555N II

The (Version 2) features a revised internal service menu compared to the original AT-5555N, with recent updates (specifically the v3 firmware released around late 2024) introducing more granular control over modulation and noise reduction [10, 13]. Accessing the Service Menu To enter the hardware service menu on the AT-5555N II: Turn the radio OFF . Press and hold the FUNC and SCAN buttons simultaneously. Turn the radio ON while continuing to hold the buttons. anytone at5555n ii service menu updated

Accessing the "Inner Sanctum"

: To enter this mode, users must follow a precise sequence: power on the radio while holding FUNC , then quickly press RB , NB , and DW (or a similar series depending on the firmware version).

Problem:

"My AM carrier is too high (10 watts), but the radio is set to low power." Solution: Go to P-07 (High Power Scale). Reduce the value from 120 to 85. This digitally reduces the drive voltage to the RD16HHF1 finals. Do not exceed 120. AnyTone AT-5555N II service menu I understand you're

Search on CB/Ham radio forums

Popular communities like WorldwideDX.com , RadioReference.com , or Transmission1 often have updated service menu entries and hidden key combinations shared by users or reps.

while powering on) wouldn't fix the underlying alignment. He needed the Service Menu The Ritual of Access AnyTone AT-5555N II The (Version 2) features a

#19 / 20

Sets the minimum carrier for AM. Often lowered to 2W for driving external amplifiers. AM Modulation