: Reduces humidity without significantly changing room temperature. Fan (Fan symbol) : Circulates air only. Heat (Sun symbol)

• No built-in temperature sensor for zoning (sensor is in indoor unit unless external sensor connected).
• No Wi-Fi / app control – That requires separate adapter (BRP069Axx).
• Cannot directly control multiple indoor units without a central controller.
• No IR receiver – Wired only.

Fan Speed

: Press the FAN button repeatedly to cycle through speed settings (Low, Medium, High, or Auto).

Note:

This is a general guide. For specific error codes or installation details, refer to the official Daikin literature provided with your indoor unit.

1. Press MENU repeatedly until “Weekly” shows.
2. Press SELECT.
3. Use ▲ / ▼ to select a day (Mon, Tue, etc.) or “Entire Week.”
4. Press SELECT.
5. Set the start time (hour/minute) and the action (ON/OFF/Mode/Temp).
6. Repeat for up to 4 actions per day.
7. Press CANCEL to finish.

Key Components:

Timer and scheduling (common steps)