Diehl Multi Timer 181 5 Manual

The Diehl Multi-Timer 181-5 is a digital time switch typically used for controlling appliances like water heaters. Based on technical documentation for related Diehl series timers (such as the 884/181 series), 1. Set the Current Day and Time

• Cleaning: Use dry or slightly damp cloth. Never use solvents.
• Pins: If a pin becomes stiff, apply ONE drop of silicone oil. Do not use WD-40.
• Motor: The synchronous motor is lubricated for life. Do not open.

: Switched output (Relay). Terminal 4 is typically the common line, while 3 and 5 provide the Normally Open (NO) and Normally Closed (NC) contacts. For official support, you can contact Diehl Metering or refer to localized guides on sites like wiring diagram diehl multi timer 181 5 manual

Diehl Multi Timer 181 5: User Guide and Operating Instructions The Diehl Multi-Timer 181-5 is a digital time

1. Device Overview

A:

With proper use (non-inductive loads, clean environment), 15–25 years. The motor and output relay are the most common failure endpoints. Cleaning: Use dry or slightly damp cloth

button again. A "2" will appear (indicating an "OFF" event). Set the "OFF" time using Repeat for up to 8 On/Off cycles. switch back to waterheatertimer.org 3. Operating Modes : The timer follows your programmed schedule. I (Fixed ON) : Manually overrides the timer to keep the circuit closed. 0 (Fixed OFF) : Manually overrides the timer to keep the circuit open. Installation and Wiring 🔌 Ensure the power is off before wiring. Terminal Connections Borg General Controls