Epson | 1390 Resetter

Epson Stylus Photo 1390 Resetter

The (also known as an Adjustment Program or AdjProg) is a utility designed to clear the internal waste ink counter or reset ink chips, allowing the printer to continue operating after reaching its service limit. Core Functions

Step 1: Enter Service Mode (The Critical Trick)

The Epson 1390 will not accept a reset in normal mode. You must put it into "Service Mode."

Beyond just clearing waste ink errors, these tools often allow you to: Perform Deep Cleanings: Run ink charging routines for stubborn clogs. Diagnostics: Read error codes and check current ink levels. Maintenance: Adjust print head alignment and paper feed settings. epson 1390 resetter

If you reset the counter without checking the sponge, ink will overflow inside the printer. This leads to:

Ink Chip Reset

: Overrides the "Ink Out" message on cartridges that still contain physical ink but are marked as empty by the chip. Epson Stylus Photo 1390 Resetter The (also known

Check the boxes for "Main pad counter" and "FL Box counter" .

The Epson 1390 resetter works by communicating with the printer's firmware and resetting the ink level counters. This process tricks the printer into thinking that the ink cartridges are full, allowing you to continue printing. Diagnostics: Read error codes and check current ink levels

Common Issues & Troubleshooting

Problem:

The resetter is in Chinese. Fix: Most Epson service tools are bilingual. Look for a button that says "English" or a globe icon in the top right corner.