Epson H842b Projector Manual [updated] -

Epson H842B is commonly referred to by its consumer model name, the Epson EB-S41

• Crestron RoomView™ / AMX / Extron compatibility for centralized control over RS-232 and network.
• Wired LAN (RJ-45) for network monitoring, email alerts, and remote management via a web browser.

1. Point directly at the IR receiver on the front or rear.
2. Replace the battery (CR2025 coin cell).
3. Check "Remote Receiver" in the Extended menu is not set to "Off."

The Rear Connector Panel (Critical for Setup)

• To get a 100-inch diagonal image, place the projector 9 to 11 feet from the screen.
• Use vertical keystone correction (+/- 30 degrees) if you cannot place it directly centered.
• Warning: Digital keystone dims the image slightly. Move the physical unit when possible.