FANUC Series 0i-TF Plus is an advanced CNC control for lathes that combines traditional G-code programming with the conversational power of Manual Guide i FANUC America 1. Programming with Manual Guide i
- Introduction: Overview of the CNC system, programming basics, and safety precautions.
- Programming Fundamentals: Description of programming concepts, such as coordinate systems, programming modes, and basic commands.
- G-Commands: Detailed explanation of G-commands, including rapid traverse, linear interpolation, circular interpolation, and more.
- M-Commands: Description of M-commands, including program control, coolant control, and auxiliary functions.
- T-Commands: Explanation of T-commands, including tool selection and tool offset.
- Programming Examples: Illustrative examples of programming techniques and applications.
Conversational Programming (Manual Guide i):
A shop-floor feature that allows operators to create programs using graphical menus rather than raw code. This includes dedicated "Start," "Cycle," and "End" icons to define operations like tool activation and machining cycles. Essential G-Codes and M-Codes
- Common alarms and their causes: parsing Fanuc alarm tables into actionable checks (servo, spindle, I/O faults).
- Debugging techniques: dry-run simulation, single-block stepping, logging and trace capture.
- Preventive maintenance: lubrication points, encoder checks, battery replacement for parameter retention.
- Backups and recovery: parameter backup, restoring program memory, emergency stops response checks.
Actual code block:
Canned Cycles
: The system supports standard canned cycles for roughing, finishing, drilling, and threading, reducing manual coding errors and ensuring consistent part quality. Programming Fundamentals
PS (Program) Alarms
Don't wait until the machine stops to read this. The back of the manual lists .
Canned Cycles
The programming manual places heavy emphasis on . These allow a programmer to execute complex geometries—like a deep-hole peck drilling (G74) or a finishing cycle (G70)—with just a few lines of code, significantly reducing the margin for manual entry errors. 3. Advanced Features of the "Plus" Series