pricingChangelogsupport
Log in
pricingChangelogsupportLog in

Hilger Watts Theodolite Manual Repack May 2026

Theodolite Repacking Procedure

To "repack" a Hilger & Watts theodolite typically refers to the process of returning the instrument to its fitted carrying case for safe storage or transport. Prepare the Instrument : Turn off the theodolite.

If you are shipping the instrument via a carrier like UPS or FedEx, the original metal case is not enough protection. You must "double-box" the unit. Surround the metal case with at least three inches of high-density foam or bubble wrap inside a heavy-duty corrugated cardboard box. Avoid using packing peanuts, as they can compress or shift, leaving the heavy instrument vulnerable to the "settling" effect during transit. Environmental Protection hilger watts theodolite manual repack

Rank Pullin Controls

Try these in Google or DuckDuckGo. Also check the archive — they absorbed Hilger Watts service documentation. Theodolite Repacking Procedure To "repack" a Hilger &

"Repacking" a Hilger & Watts theodolite typically refers to the process of stripping down the mechanical assemblies, removing old, hardened grease (a common issue with vintage instruments), and applying fresh lubricants to ensure smooth operation of the horizontal and vertical axes. Understanding Hilger & Watts Mechanics The repack is for a different variant –

Engage the metal buckles or latches. If your case has the original leather strap

Perform a series of test measurements to ensure the theodolite is functioning accurately and smoothly.

The Hilger Watts Theodolite

  1. The repack is for a different variant – Hilger Watts made “Microptic” with either glass circles or early metal circles. Ensure your manual matches the serial number range (usually printed inside the lid of the wooden box).
  2. Missing a step in the adjustment sequence – Some repacks omit the crucial “loosen the locking ring before turning the eccentric pins.” Check the original factory manual (often found in university archives) to reconcile.
  3. Worn components – No manual can repair a stripped gear. In that case, the repack’s parts list will help you identify the gear module and tooth count to order a custom-cut replacement.

For the main vertical and horizontal axes, the process involves removing the telescope from its bearings . Clean the spindle and the sleeve thoroughly.