How To Reset Sharp Ar-6020 ~repack~

Resetting to Factory Defaults

To reset a Sharp AR-6020 , you must first determine if you need to clear a specific error code or return all settings to factory defaults.

The Problem

1. Open the front cover.
2. Turn the main power on.
3. Wait for the machine to display a maintenance code.
4. Close the front cover. (Sometimes auto-reset occurs).
5. If not, enter Simulation 25-01 (Developer count reset) or 42-01 (Toner counter reset):

   Maintenance Counter Reset (Code 20):

   Select "Execute" or "Yes" to clear trouble codes like H-series errors. Type 20 and press [Start] . Use sub-code 1 to reset the maintenance cycle counter. Developer Counter Reset (Code 24): Type 24 and press [Start] . how to reset sharp ar-6020

   1. Press the # key (hash/pound) and hold it down.
   2. While holding #, press the * key (star/asterisk).
   3. The display should show "MAINTENANCE MODE" or a number like 01.
   4. Using the numeric keypad, type 42 . (Simulation 42 resets the drum counter).
   5. Press the Start button (the large button with a triangle).
   6. The display will show a blinking number (e.g., 100). Type 0 using the keypad.
   7. Press the Start button again. The machine will whir for a moment.
   8. Press the CA (Clear All) button twice to exit maintenance mode.
   1. Turn off the printer and unplug it for 15 minutes (this resets the thermal fuse logic).
   2. Plug it back in and turn it on. If H2 returns:
   3. Enter Maintenance Mode (# + * simultaneously).
   4. Type 14 (Simulation 14 cancels fuser errors).
   5. Press Start. The error should clear.
   6. Press CA twice to exit.