-313- Error !link! - Hp Nvme Ssd

An HP NVMe SSD with a "-313-" (or 313) error code is a critical smart analyzer or diagnostic code indicating a hard drive failure or an issue with the NVMe communication interface.

The Performance (When it Works)

re-seat the NVMe SSD

Open the chassis and by removing the screw, sliding it out, and firmly re-inserting it into the M.2 slot. Loose connections are a leading cause of detection failures. Load Intel RST Drivers (During OS Reinstall) hp nvme ssd -313- error

Step 1: Diagnosing Error 313 (Is it really the drive?)

: In some specific cases, outdated BIOS or firmware versions can trigger a false 313 error, especially with certain third-party SSDs like the Crucial P3. HP Support Community Immediate Action Steps Backup Your Data An HP NVMe SSD with a "-313-" (or

  1. Update HP system BIOS (highest priority).
  2. Update NVMe drive firmware via HP SoftPaq (search by PC model + “SSD firmware”).
  3. In UEFI/BIOS → Advanced → Built-in Device Options → uncheck “Enable SMART Reporting” (disables warning but mask only).
  4. Clear SMART log via nvme CLI (Linux): sudo nvme smart-log-update /dev/nvme0 (rarely supported).
  5. Perform Secure Erase (NVMe format) to reset some internal stats – only if drive otherwise healthy.

"NVMe SSD -313- Error."

In the world of enterprise and high-performance computing, HP’s NVMe SSDs are generally regarded as reliable workhorses. They offer solid read/write speeds and integrate seamlessly into ProLiant servers. However, if you are reading this review, you likely aren't looking for benchmark numbers. You are likely staring at a blinking amber light and a cryptic message on your iLO dashboard: Update HP system BIOS (highest priority)

  1. Turn off the PC.
  2. Turn it on and repeatedly press F2 (or Esc to open the startup menu, then F2).
  3. Select Component Tests → Storage → Hard Drive → Quick Test.
  4. If you see Error 313 again, proceed to Extensive Test (this may take 2+ hours).