Ki — 256 Installation Manual

KI 256 Flight Command Indicator

The is a self-contained vertical gyroscope used in high-performance BendixKing flight control systems like the KFC 150 and KFC 200. Because this is a critical flight instrument, physical installation and maintenance must be performed by authorized personnel using the official KI 256 Maintenance Manual or the relevant Flight Control System Installation Manual.

The BendixKing KI 256 flight command indicator requires installation by an FAA-certified technician, ensuring precise mounting in a standard 3-inch panel cutout and proper leveling with the aircraft's axes. Installation must strictly adhere to the BendixKing Installation Manual (P/N 006-00148-XXXX) for necessary 115VAC/400Hz power, signal connections for the autopilot, and post-installation calibration. For technical details, refer to the official BendixKing installation documentation. ki 256 installation manual

. This modification involves replacing the Command Bar Board to reduce loading effects on pitch and roll outputs, particularly when used with certain autopilot computers. Alignment Procedure KI 256 Flight Command Indicator The is a

Please consult the manufacturer or authorized representative for any questions or concerns regarding the installation and operation of the KI 256. This modification involves replacing the Command Bar Board

5.1 Power-On Test

The unit weighs approximately 3.3 lbs and is designed for standard instrument panel mounting. Southeast Aerospace Inc. Documented Upgrades

5. Section 5: Troubleshooting

Panel Tilt

: Units are manufactured specifically for either 0-degree or 8-degree instrument panel slopes; ensure the part number matches your panel configuration. 2. Mechanical Installation

Power Supply

: Operates on 14/28 VDC (approx. 0.7 AMP max) and 10 VAC, 430Hz (0.2 AMP max). Dimensions : Approximately 3.55" W x 3.37" H x 7.31" L. Weight : Approximately 3.3 lbs.