Knox Keysecure 3b Installation Manual Hot |link| -

The Knox KeySecure 3B Go to product viewer dialog for this item.

Use a 5/32" Allen wrench to remove the socket cap bolts on the sides, then lift the unit up and off the back cover. knox keysecure 3b installation manual hot

Pre-Installation Requirements

Power Supply:

The unit requires constant power to operate the keypad and tracking software, though it will not release the key if power is lost. Requires a 3 amp, 12-volt DC power supply. The Knox KeySecure 3B Go to product viewer

• [ ] Use M6 or #10-32 screws (do not use plastic cage nuts for this heavy unit – 18 lbs / 8.1 kg)
• [ ] Leave 1U empty above and below for airflow
• [ ] Verify the anti-tilt bar is installed if using a two-post rack

: The KeySecure 3B operates on a 12 to 15 volt DC power supply and requires 3 amps. : The unit features a 4-position quick-connect terminal block for simplified installation. Relay Circuit [ ] Use M6 or #10-32 screws (do