Kt 70 Installation Manual Review
BendixKing KT 70 Installation Manual (Part Number 006-00673-0001) is a technical document essential for the proper setup of the Mode S transponder. While comprehensive, it is highly technical and intended for certified avionics technicians. General Overview
- If using a thermocouple: Use appropriate extension wire (type K wire for K-type sensor). Copper wire will introduce a cold-junction error.
- If using RTD: Use 3-wire configuration for lead resistance compensation.
- KT 70 main unit
- Mounting bracket(s) and screws
- Power cord or terminal block cover (if applicable)
- User quick-start leaflet
- Warranty and safety sheet
Chapter 8: Maintenance After Installation
Step 1: Connect Display to Controller
- Align the arrow mark on the display’s male connector with the notch on the female harness.
- Push firmly until you feel a click (waterproof seal engaged).
- Screw the locking collar (if present) by hand – do not use pliers.