Mitutoyo Caliper Error Code E--05 Verified ◉

E-05 error on a Mitutoyo Digimatic caliper indicates an overspeed error

The simplest way to clear the code is to reset the electronic unit: Wipe the scale mitutoyo caliper error code e--05

Step 2: Check Battery Installation

• Crack the glass scale (invisible to the naked eye but fatal to readings).
• Shift the position of the copper reference pads inside the beam.
• Misalign the thin-film connector between the slider PCB and the display.

To minimize the occurrence of the E-05 error and ensure the longevity of your Mitutoyo caliper: E-05 error on a Mitutoyo Digimatic caliper indicates

Mitutoyo caliper error code E--05

In this deep-dive article, we will cover everything you need to know about the , including its technical meaning, step-by-step troubleshooting, common misconceptions, and how to prevent it from ever coming back. Crack the glass scale (invisible to the naked

1. Scale Contamination: Debris, metal chips, or oil have obscured the magnetic pattern on the beam, preventing the sensor from reading the origin mark.
2. Rapid Movement: The slider was moved too quickly across the origin point during startup or reset, causing the sensor to "skip" over the origin signal.
3. Electrical Fault: A short circuit or component failure within the sensor head or the main PCB.
4. Physical Damage: A drop or impact that shifted the sensor head alignment relative to the scale.