Monkey Rocker Plans !full! Link

was a hobbyist woodworker who loved a challenge. One rainy afternoon, he stumbled upon a set of vintage "Monkey Rocker" plans in a dusty corner of his grandfather’s workshop. To the uninitiated, a Monkey Rocker sounds like a children’s toy—perhaps a whimsical rocking horse shaped like a primate. However, in the world of specialized furniture, it is a self-powered "sex glider" or mechanical rocking chair designed for adult use

1. Ignoring Grain Direction

1. The Tip Test: Push the rocker to its side. It should not tip past 20 degrees. If it does, the curved runners are too steep.
2. The Weight Test: Put a 50-lb sandbag on the seat. Rock it aggressively. Listen for creaking.
3. The Pinch Test: Check between the monkey’s arm and the rocker base. There should be no gap large enough for a toddler’s finger (wider than 3/8” or narrower than 1/8” is dangerous—either pinch or crush hazard).

Crucial step:

Use a jigsaw or bandsaw to cut the curved runners. After cutting, clamp the two runners together and sand their edges simultaneously. They must be identical, or the rocker will wobble. monkey rocker plans

Key Components of a Monkey Rocker

• Print and tape your templates.
• Use spray adhesive (3M Super 77) to temporarily attach the paper to the plywood.
• Pro tip: Do not cut directly on the line. Cut slightly outside, then sand down to the line for a perfect edge.

Because these chairs rock dynamically, glue alone will fail. Serious plans specify knockdown hardware (bolts and inserts) so you can disassemble the chair for refinishing or moving. was a hobbyist woodworker who loved a challenge

2. Material Efficiency

Where to Find Detailed Plans