Motorola Gm360 - Programming Software ((exclusive))

Motorola GM360 is part of the "Professional Series" (also known as the Waris platform) and requires specific Customer Programming Software (CPS) to configure its channels, signaling, and features. Essential Requirements To program the GM360, you need the following components: You need the Professional GP300/GM300 Series CPS

1. Click Write or press F4.
2. The CPS will warn you that writing will overwrite the radio’s configuration. Confirm.
3. Again, you may need to power cycle the radio on the “Power on radio…” prompt.
4. Wait for the progress bar. A successful write ends with a beep from the radio and a green “Complete” message.

Motorola Professional Series CPS

To program the GM360, you typically need the official (often identified by part numbers like ENLN4115U ). motorola gm360 programming software

• Launch the CPS.
• Go to Preferences → Communications Port. Select the COM port you set in Step 2 (e.g., COM1).
• Set baud rate to 9600 (default).

The Software You Actually Need

What the GM360 is

Operating System

: The GM series was primarily designed for the European market. While newer software might run on Windows 10 or 11, many technical experts recommend a 32-bit OS (like Windows XP or 7) for the most stable connection with older Professional Series CPS. Top Features You Can Configure Motorola GM360 is part of the "Professional Series"