Samyung Srg-1150dn Installation Manual ((free)) -

: Requires a 10m coaxial cable (SR-8U-10M) and an unsoldered control cable (SAT-100-10M). NBDP Terminal (SN-100)

Clean water flow: No turbulence from strakes, through-hull fittings, or propellers.
Depth: Must be submerged at all speeds.
Avoid air bubbles: Do not mount near water intake or step-lift hulls.

Place the Printer on a Flat Surface: Position the printer on a flat, stable surface, ensuring that it is level and secure.
Connect the Power Cord: Connect the power cord to the printer and plug it into a nearby power outlet.
Turn On the Printer: Press the power button to turn on the printer. The printer's LED display will illuminate, indicating that it is ready for installation.
Install the Label Roll: Open the printer's top cover and insert the label roll into the label holder. Ensure that the label roll is properly seated and aligned.
Install the Ribbon (Optional): If you are using a ribbon, insert it into the ribbon holder. Make sure the ribbon is properly seated and aligned.
Connect the USB Cable: Connect the USB cable to the printer and your computer.
Install the Printer Driver: Insert the installation CD into your computer's CD drive. Follow the prompts to install the printer driver. You can also download the driver from the Samyung website.

: Use a separate antenna (e.g., KUM-803 whip) for the DSC receiver. : Securely connect the samyung srg-1150dn installation manual

The is a GMDSS-compliant marine radio system designed for long-range digital selective calling (DSC) and narrowband direct-printing (NBDP). Introduction : Requires a 10m coaxial cable (SR-8U-10M)

: Install the unit at least 1.5m away from magnetic compasses. Clean water flow: No turbulence from strakes, through-hull