Point Driver Huawei Patched | Test

detailed feature explanation

It seems you are asking for a of a Test Point Driver for Huawei devices.

This is where the story of the "Huawei Test Point Driver" truly begins. test point driver huawei

"Browse my computer for drivers"

Choose and then "Let me pick from a list." Select Ports (COM & LPT) and click Have Disk . detailed feature explanation It seems you are asking

The Ultimate Guide to Test Point Driver for Huawei Devices: Resetting, Unlocking, and Repairing

Here are the steps to install and use the Huawei Test Point Driver: Disassembly: The phone must be opened to access

| Huawei Chipset | Test Point Mode Available? | Can Flash? | Can Unlock FRP/Bootloader? | | --- | --- | --- | --- | | Kirin 620–655 | ✅ Yes | ✅ Full | ✅ Yes (via PotatoNV) | | Kirin 659–960 | ✅ Yes | ✅ Full | ✅ Yes (via HCU/Sigma) | | Kirin 970 | ⚠️ Limited | ✅ Full | ❌ No (FRP only via paid service) | | Kirin 980/990 | ✅ Yes | ✅ Full (IDT) | ❌ No (e-fuse prevents unlock) | | Kirin 990 5G/9000 | ❌ No | ❌ No (requires authorized account) | ❌ No |

1. Disassembly: The phone must be opened to access the motherboard.
2. Locate the Point: You must find the specific test point for your model (often labeled "TP" or shown in repair diagrams). It usually involves two copper pads that need to be connected.
3. Short the Point: Use tweezers to connect the two points.
4. Connect USB: While holding the short, connect the USB cable to the phone and PC.
5. Verify Connection: The phone should not boot up to the logo. It should appear as a "black screen" device, and the PC should make the USB connection sound.
6. Check Device Manager: Look for the COM port (QDLoader 9008).
7. Execute Software: Once the driver loads and the COM port is active, you can use your software tool to flash firmware, remove FRP (Factory Reset Protection), or reset the bootloader.