Tomzn Tovpd1-60-ec Manual !!better!! -

The TOMZN TOVPD1-60-EC is an adjustable, Din-rail mounted protection device that monitors over-voltage, under-voltage, and current while measuring energy (kWh). It features customizable settings via an LED interface for voltage/current thresholds and recovery times, alongside RS485 Modbus-RTU communication capabilities. For more information, refer to the manufacturer's technical specifications.

1. Introduction

• Ensure the breaker is ON and the LCD is lit.
• Press and hold the physical "Set" button for 10 seconds until the "Status LED" flashes rapidly (usually blue or red).
• Slow flash (1 sec interval): EZ Mode (Easy pairing).
• Fast flash (0.2 sec interval): AP Mode (Access Point). Toggle by double-pressing the button.

A1-A14 setting sequence

I can provide the for step-by-step programming. tomzn tovpd1-60-ec manual

5. Wiring Diagram Concept

: Users can check the cause of the last trip (e.g., "HU" for high voltage or "LU" for low voltage) by pressing and holding the button for more than 12 seconds. Key Technical Specifications The TOMZN TOVPD1-60-EC is an adjustable, Din-rail mounted

Setup:

Hold "SET" for 3s to enter menu; use "SET" for modes (P1-P8) and UP/DOWN to adjust. Fault History: Hold UP for >12s (stores 5 records). Factory Reset: Hold DOWN for >12s. Calibration: Adjustable by in settings. Parameter Configuration (P1-P7) Ensure the breaker is ON and the LCD is lit